URA21PLUS Emergency Light 200 Lumens 1H

The Legrand URA21 LED PLUS Autotest 660608PL emergency light is an autonomous LED luminaire designed to provide safety lighting in the event of a power outage. It offers a luminous flux of 200 lumens, a 1-hour autonomy and non-maintained operation, and also incorporates an Autotest system that makes it easy to periodically check the condition of the luminaire.

With IP42 and IK07 protection, a rechargeable nickel-cadmium battery and an ultra-slim 210 by 110 by 41 millimeter format, it is especially suitable for escape routes, corridors, stairways, exits and other indoor areas where emergency lighting is required.

URA21 LED PLUS 200-lumen emergency light

Reference 660608PL belongs to Legrand's URA21 LED PLUS Autotest range. In the event of a mains failure, the luminaire automatically activates its LED source and provides a nominal luminous flux of 200 lumens for 1 hour.

Its function is to maintain temporary safety lighting that helps people orient themselves and evacuate when normal building lighting is lost.

Non-maintained operation

The Legrand 660608PL is a non-maintained emergency luminaire. This means that the emergency light source remains off while normal power supply is available and automatically switches on when a power failure occurs.

During normal operation, the system keeps the battery charged and monitors the condition of the unit so it can come into service when needed.

Autotest system for easier maintenance

One of the main features of this reference is its Autotest function. This system automatically performs periodic checks of the luminaire and its autonomy, reducing the need to carry out all inspections manually.

In Legrand's Autotest range, a test of the light source and a battery autonomy test are performed periodically. The status of the unit is communicated through LED status indicators, making it easier to identify possible faults during maintenance tasks.

This function is especially useful in buildings with several emergency luminaires, where manual individual checking of each unit can take a considerable amount of time.

1-hour autonomy

The luminaire provides a nominal autonomy of 1 hour. During this period it maintains the specified 200 lumens of luminous flux for emergency operation.

The autonomy is supported by the integrated battery and has been included in the product's official certification.

Integrated nickel-cadmium battery

The Legrand 660608PL incorporates a rechargeable nickel-cadmium battery made up of 2 cells.

• Battery voltage: 2.4 volts.
• Capacity: 1.5 ampere-hours.
• Technology: nickel-cadmium.
• Number of cells: 2.

The battery provides the energy needed to maintain lighting during a power outage and recharges while the luminaire remains connected to the mains.

4 LEDs for emergency lighting

The unit incorporates 4 LED sources of 0.25 watts each. The optics and diffuser are designed to distribute light appropriately for lighting and evacuation route signage applications.

The maximum consumption indicated for this reference is approximately 1.7 watts.

Opal diffuser and ultra-slim format

The luminaire features an opal plastic diffuser that helps distribute the light generated by the LEDs evenly.

Its body has a compact, ultra-slim design, with only 41 millimeters of depth, which makes it easy to integrate into walls and ceilings in indoor spaces.

Dimensions of the Legrand 660608PL

• Length: 210 millimeters.
• Width: 110 millimeters.
• Depth: 41 millimeters.
• Color: white.
• Housing material: plastic.
• Diffuser material: opal plastic.

These dimensions allow the luminaire to be installed discreetly in different circulation and evacuation areas.

IP42 protection

The URA21 LED PLUS 660608PL has an IP42 protection rating and is intended mainly for indoor installations.

For applications where a higher degree of sealing is required, the URA21 LED PLUS range includes specific accessories that allow certain luminaires to be adapted to other installation conditions.

IK07 impact resistance

The luminaire has IK07 mechanical resistance, providing protection against impacts during normal use.

This feature is especially useful in passage areas and common spaces where installed equipment may be exposed to accidental knocks.

Class II electrical protection

The Legrand 660608PL is classified as a Class II electrical shock protection unit.

This classification applies to equipment that incorporates reinforced insulation or double insulation as an electrical protection measure.

230-volt supply

The luminaire is designed to operate with a nominal supply of 230 volts AC and a frequency of 50 or 60 hertz.

The technical distribution documentation indicates an operating range of approximately 207 to 253 volts.

Remote standby mode

Reference 660608PL supports remote standby mode via remote control. This function allows the status of the luminaire to be managed from a compatible device in the installation.

Standby mode can be used to avoid unnecessary battery discharge when the electrical supply to an unoccupied building is intentionally interrupted.

Surface mounting

The luminaire is prepared for surface mounting. Its compact design allows it to be installed on a wall or ceiling according to the needs of the evacuation route and the emergency lighting project.

The URA21 LED PLUS range also includes installation accessories to expand mounting options, including solutions for recessed installation.

Terminals for easier wiring

Connection to the mains is made through electrical terminals. The product accepts conductors with common cross-sections used in emergency lighting installations and is prepared for through wiring.

These features make it easier to install several luminaires within the same emergency circuit.

Status indicators for maintenance

The Autotest system uses indicator lights to communicate the operating status of the luminaire. This makes visual inspection easier during periodic emergency lighting maintenance operations.

Legrand's Autotest systems make it possible to identify correct operation and warn of incidents related to the light source or battery.

Certified for emergency lighting

The Legrand 660608PL has AENOR certification and ENEC certification for its emergency lighting characteristics.

The official documentation confirms its 200-lumen luminous flux, 1-hour autonomy, non-maintained operation, nickel-cadmium battery, IP42 and IK07 protection and Class II electrical rating.

Technical features of the Legrand 660608PL

• Brand: Legrand.
• Range: URA21 LED PLUS.
• Reference: 660608PL.
• Product type: autonomous LED emergency luminaire.
• Version: Autotest.
• Operation: non-maintained.
• Application: evacuation route lighting and identification.
• Emergency luminous flux: 200 lumens.
• Autonomy: 1 hour.
• Standby luminous flux: 0 lumens.
• Light source: LED.
• Number of LEDs: 4.
• Rated power of each LED: 0.25 watts.
• Maximum system power: approximately 1.7 watts.
• Nominal voltage: 230 volts AC.
• Supply range: approximately 207 to 253 volts.
• Frequency: 50 or 60 hertz.
• Battery technology: nickel-cadmium.
• Battery voltage: 2.4 volts.
• Battery capacity: 1.5 ampere-hours.
• Number of battery cells: 2.
• Test system: Autotest.
• Status indicators: LED.
• Remote standby mode: yes.
• Protection rating: IP42.
• Impact resistance: IK07.
• Electrical protection class: Class II.
• Housing material: plastic.
• Diffuser material: opal plastic.
• Color: white.
• Length: 210 millimeters.
• Width: 110 millimeters.
• Depth: 41 millimeters.
• Main installation: surface mounting.
• Through wiring: yes.
• Recommended use: indoor.
• Certification: AENOR and ENEC.

Autotest emergency light to simplify inspections

The Legrand URA21 LED PLUS 660608PL combines a 200-lumen light output and 1-hour autonomy with the Autotest function, which makes it easier to periodically monitor the condition of the luminaire and its battery.

Its non-maintained operation, integrated nickel-cadmium battery, IP42 and IK07 protection, ultra-slim format and status indication make this luminaire a particularly suitable solution for evacuation routes and indoor passage areas where the aim is to simplify both installation and maintenance of emergency lighting.